Welcome to Sherwoods Power Equipment

We don't sell lumber, faucets,
cars, or anything else.

facebook Sherwoods Facebook...

 

We can ship
most parts
anywhere
in the USA!

Just call us!

1775 Route 300
(aka. 423 North Plank Rd)
Newburgh, NY  12550

(845)564-0630

M-F 8:30am - 6pm
Sat. 8:30am - 4pm
Sun. - Closed

We watch for Email

Google +1 Program

We sell Aggrand products. We sell Amsoil products. Newburgh, NY Weather  
Click for Newburgh, New York Forecast 

Local weather and news:

MidhudsonNews.com
MidHudsonWeather.com  

 Construction

 

 

Stihl has a great demo saw, as can be attested by our many commercial entities who own them. Even have Tommy Hilfiger's brother runs them. (No lie, he's our customer!)

The latest enhancement Stihl has introduced is the EWC feature, available on the TS410 and TS420.  These electronic water control, in that when the engine is idling - you don't need water.  When you rev the engine, the water turns on. After all, that is when you need the water; when you are cutting!  It also has a keypad to adjust the amount of water flow, and it remembers what you asked for last time.

The most important, yet neglected part of the cutoff saw is the air filter. It's a dirty mess, and nobody wants to deal with it.  Now with Stihl's new design, the operator can go up to 1 year without changes, depending upon cutting conditions.


STIHL, the number one selling brand of cut-off machines worldwide, features the X2 Air Filtration System, standard on the STIHL TS 410, TS 420, TS 700 and TS 800. This low maintenance air filtration system revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. It's virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.

A Swirling motion at separation tunnels removes 80% of dirt particles.
B Pre-cleaned air passes through primary and secondary filters.
C 99.96% clean air enters the carburetor and engine.

 

  This new air filtration method on many of the new Stihl cutoff saws allows the operator to keep using the machine longer between air filter replacement. It has a special swirling motion that removes up to 80% of the particles.  This way over 99% of the air that enters the carb has been cleaned.